产品主页
光纤产品
光纤延长器
通过型切换发送器 DisplayPort 延长器 HDMI 延长器 DVI 延长器 RGB 和高清分量视频延长器 3G-SDI 延长器标清视频 USB 延长器附件光纤切换器光纤矩阵切换器光纤音频和控制产品光纤散装电缆光纤连接器和附件光纤成品线
FOX3 SR 301
FOX II T HD 4K FOX3 R 101 FOX3 R 301 FOX3 R 311 FOX3 SR 201 FOX3 SR 301 FOX3 SR 311 FOX3 T 101 FOX3 T 201 FOX3 T 201 PC FOX3 T 301 FOX3 T 301 PC FOX3 T 311 FOX3 T 311 PC FOXBOX Rx HDMI FOXBOX SR HDMI FOXBOX Tx HDMI HD Pro Plenum 系列 HFX 100 PowerCage 401 FOX DR HD PowerCage 401 FOX DT HD PowerCage FOX Rx HDMI

打印

FOX3 SR 301

用于 HDMI、USB、音频、控制和 3D 同步信号的光纤图像解析度转换接收器

主要特性

即将推出支持 FOX3 Matrix 系统内的 KVM 系统配置和控制
即将推出在屏显示功能可在工作站显示器上提供信号源信息
接收来自 FOX3 系列发送器的光纤信号，并提供解析度转换后的 HDMI 视频、USB、立体声音频、RS-232 控制、红外控制和 3D 同步信号
高性能的图像解析度转换器支持高达 4096x2160 @ 60 Hz、带 4:4:4 色度取样的可选输出分辨率
通过单根光纤传输分辨率高达 4096x2160/60 Hz、带 4:4:4 色度取样的数学无损 4K 视频信号
通过两根光纤传输分辨率高达 4096x2160/60 Hz、带 4:4:4 色度取样的无压缩 4K 视频信号
所有特性

图片库

概述
视频
描述
技术参数
示意图
面板图
下载

概述

Extron FOX3 SR 301 光纤图像解析度转换接收器通过光纤长距离传输符合 HDCP 标准的 HDMI 视频、USB、音频、RS-232 控制、红外控制和 3D 同步信号。其设计着力于出色的高分辨率图像性能，它采用 Extron 全数字化技术，可通过两根光纤完美地传输像素级无压缩的分辨率高达 4K/60 @ 4:4:4 的图像，或通过单根光纤传输数学无损的 4K/60 @ 4:4:4 视频信号。USB 端口支持 USB 3.0 至 1.0 设备，而 USB HID 端口的过滤功能则可将设备类型限定为仅支持 HID。专门设计用于视音频和 KVM 系统的图像解析度转换接收器还包括许多易于集成的特性，如密钥管理器 (Key Minder^®)、音频解嵌、以太网监视和控制以及实时的系统监控。

视频

描述

技术参数

示意图

面板图

下载

近期查看的产品

FOX3 SR 301

建筑工程规范

选择一个产品编号：

Select a Part Number:

复制文本已复制！发生错误。请稍后重试。

60-1749-21 - FOX3 SR 301 MM - Lossless 4K/60 Scaling Receiver MM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, USB, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB, control, and 3D sync signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
  5. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. USB 2.0 output requirements
  1. Shall provide one (1) USB Type A connector on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
7. USB HID output requirements
  1. Shall provide two (2) USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 100 mA on each port to power a peripheral device
    2. Provide the capability to power a peripheral device that is connected to a USB HID port
  2. Shall support USB HID devices or smart card readers
  3. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, USB HID presence, USB 2.0 presence, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a 1U high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 301 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 SR 301 MM (60-1749-21); no alternates or equals

60-1749-21 - FOX3 SR 301 MM - Lossless 4K/60 Scaling Receiver MM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, USB, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB, control, and 3D sync signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
  5. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. USB 2.0 output requirements
  1. Shall provide one (1) USB Type A connector on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
7. USB HID output requirements
  1. Shall provide two (2) USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 100 mA on each port to power a peripheral device
    2. Provide the capability to power a peripheral device that is connected to a USB HID port
  2. Shall support USB HID devices or smart card readers
  3. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, USB HID presence, USB 2.0 presence, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a 1U high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 301 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 SR 301 MM (60-1749-21); no alternates or equals

60-1749-22 - FOX3 SR 301 SM - Lossless 4K/60 Scaling Receiver SM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, USB, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB, control, and 3D sync signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
  5. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. USB 2.0 output requirements
  1. Shall provide one (1) USB Type A connector on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
7. USB HID output requirements
  1. Shall provide two (2) USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 100 mA on each port to power a peripheral device
    2. Provide the capability to power a peripheral device that is connected to a USB HID port
  2. Shall support USB HID devices or smart card readers
  3. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, USB HID presence, USB 2.0 presence, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a 1U high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 301 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 SR 301 MM (60-1749-22); no alternates or equals

60-1749-22 - FOX3 SR 301 SM - Lossless 4K/60 Scaling Receiver SM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, USB, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB, control, and 3D sync signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
  5. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. USB 2.0 output requirements
  1. Shall provide one (1) USB Type A connector on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
7. USB HID output requirements
  1. Shall provide two (2) USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 100 mA on each port to power a peripheral device
    2. Provide the capability to power a peripheral device that is connected to a USB HID port
  2. Shall support USB HID devices or smart card readers
  3. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of mathematically lossless computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over one fiber
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, USB HID presence, USB 2.0 presence, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a 1U high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 301 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 SR 301 MM (60-1749-22); no alternates or equals

60-1749-23 - FOX3 SR 301 MM - Uncompressed 4K/60 Scaling Receiver MM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, USB, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB, control, and 3D sync signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
  5. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. USB 2.0 output requirements
  1. Shall provide one (1) USB Type A connector on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
7. USB HID output requirements
  1. Shall provide two (2) USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 100 mA on each port to power a peripheral device
    2. Provide the capability to power a peripheral device that is connected to a USB HID port
  2. Shall support USB HID devices or smart card readers
  3. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, USB HID presence, USB 2.0 presence, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a 1U high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 301 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 SR 301 MM (60-1749-23); no alternates or equals

60-1749-23 - FOX3 SR 301 MM - Uncompressed 4K/60 Scaling Receiver MM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, USB, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB, control, and 3D sync signals over multimode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
  5. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. USB 2.0 output requirements
  1. Shall provide one (1) USB Type A connector on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
7. USB HID output requirements
  1. Shall provide two (2) USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 100 mA on each port to power a peripheral device
    2. Provide the capability to power a peripheral device that is connected to a USB HID port
  2. Shall support USB HID devices or smart card readers
  3. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 500 m (1640 feet) over OM4 laser optimized multimode fiber optic cabling
  4. Shall support an optical loss budget of at least 9.7 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, USB HID presence, USB 2.0 presence, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a 1U high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 301 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 SR 301 MM (60-1749-23); no alternates or equals

60-1749-24 - FOX3 SR 301 SM - Uncompressed 4K/60 Scaling Receiver SM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, USB, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB, control, and 3D sync signals over singlemode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
  5. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. USB 2.0 output requirements
  1. Shall provide one (1) USB Type A connector on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
7. USB HID output requirements
  1. Shall provide two (2) USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 100 mA on each port to power a peripheral device
    2. Provide the capability to power a peripheral device that is connected to a USB HID port
  2. Shall support USB HID devices or smart card readers
  3. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, USB HID presence, USB 2.0 presence, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a 1U high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 301 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 SR 301 SM (60-1749-24); no alternates or equals

60-1749-24 - FOX3 SR 301 SM - Uncompressed 4K/60 Scaling Receiver SM

Shall provide a fiber optic scaling receiver that support the distribution of HDMI video, stereo audio, USB, RS-232 control, IR control, and 3D sync
1. Long distance signal extension of digital video with embedded stereo audio, USB, control, and 3D sync signals over singlemode fiber optic cabling
2. Video output requirements
  1. Shall provide one (1) female HDMI Type A connector for digital video signals with embedded audio
  2. Shall support the following HDMI 2.0 specification features:
    1. Shall support computer and video resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
    2. Shall support data rates up to 18 Gbps – 6 Gbps per lane
    3. Shall support 12-bit color bit depth for resolutions up to 4K/60
  3. Shall provide selectable computer and video resolutions up to 4096x2160 at 60 Hz with 4:4:4 chroma sampling
  4. Shall provide selectable aspect ratio control
    1. FILL mode – the video image shall always fill the output screen without letterbox or pillarbox
    2. FOLLOW mode – the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
  5. Shall provide one (1) two-pole captive screw connector on rear panel for a 3D sync signal
3. Embedded audio output requirements
  1. Shall provide one (1) female HDMI Type A connector – shared with video input
  2. Shall support PCM stereo audio formats
  3. Shall support HD lossless audio formats
4. Analog Audio output requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide the de-embedding of analog stereo audio
  3. Shall provide capability to mute analog audio
5. Audio return channel input requirements
  1. Shall provide one (1) 3.5 mm, 5-pole captive screw connector for balanced or unbalanced analog stereo
  2. Shall provide an audio return channel for transmission of stereo audio from the receiver to the transmitter over fiber
6. USB 2.0 output requirements
  1. Shall provide one (1) USB Type A connector on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
7. USB HID output requirements
  1. Shall provide two (2) USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 100 mA on each port to power a peripheral device
    2. Provide the capability to power a peripheral device that is connected to a USB HID port
  2. Shall support USB HID devices or smart card readers
  3. Shall support data transfer rates up to 480 Mbps
8. Control requirements
  1. Shall provide one (1) female mini USB port B on front panel for setup and configuration
  2. Shall provide one (1) bidirectional RS-232 connector on rear panel for setup and configuration
  3. Shall provide one (1) bidirectional RS-232 connector on rear panel for control pass-through
  4. Shall provide one (1) bidirectional IR control port
  5. Shall support IR remote control pass-through transmission from the receiver to the transmitter for control of source equipment
  6. Shall support IR remote control pass-through transmission from the transmitter to the receiver for control of display equipment
  7. Shall provide one (1) Ethernet port on rear panel for the following functionalities:
    1. Support setup and configuration
    2. Support control signals from a control system
    3. Support Ethernet insertion of RS-232 signals for transmission to a FOX3 endpoint
9. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide three (3) LC-type fiber optic connectors for interconnection between transmitter and receiver
10. Transmission requirements
  1. Shall support extension of video, audio, USB, and control signals over multimode fiber optic cabling
  2. Shall support transmission of uncompressed computer and video at resolutions up to 4096x2160 @ 60 Hz with 4:4:4 chroma sampling over two fibers
  3. Shall provide a fiber optic signal transmission distance capability of 20 km (12.4 miles) over singlemode fiber optic cabling
  4. Shall support an optical loss budget of at least 7.4 dB between transmitter and receiver
11. HDCP requirements
  1. Shall be HDCP 2.2 compliant
  2. Shall include Extron Key Minder® technology to authenticate and maintain continuous HDCP encryption between the input and output devices to ensure quick and reliable switching
  3. Shall support human-readable visual confirmation of HDCP compliance when encrypted content is routed to a non-compliant display
12. Power requirements
  1. Shall be equipped with an internal, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
13. General requirements
  1. Shall provide visual signal on LED indicators located on the front panel for HDMI video signal presence, HDCP authentication, USB HID presence, USB 2.0 presence, and power
  2. Shall provide visual signal on LED indicators located on rear panel for fiber optic link status, Ethernet link status, and power
  3. Shall have a 1U high, half rack width metal enclosure
  4. Shall be rack mountable with optional rack shelf
  5. Shall be furniture mountable with optional mounting kits
  6. Shall meet regulatory compliance
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. Appropriate requirements of RoHS, WEEE
  7. Shall provide at least three years parts and labor warranty
  8. Shall be compatible with the Extron FOX3 T 301 fiber optic transmitter
  9. Shall be compatible with Extron FOX3 Series fiber optic transmitters
  10. Shall be compatible with Extron FOX3 Series matrix switchers to create an HDCP-compliant signal distribution system up to 2000x2000 and larger
14. Approved device shall be the Extron FOX3 SR 301 SM (60-1749-24); no alternates or equals

把商品添加到购物车

Order Message Number

产品编号

注: 使用通用交流电源插座的 Extron 产品可支持多种不同的交流电源插头类型。在使用之前，确保设备满足您所在区域的所有规定要求，并符合所有应用的本地安全和电气规程及标准。

数量

当前总计：

查看购物车

FOX3 SR 301 -

产品详情

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.

通过邮件分享该项目

FOX3 SR 301

用于 HDMI、USB、音频、控制和 3D 同步信号的光纤图像解析度转换接收器

发送至： *

请输入一个有效的邮箱地址。

消息:

发给我一个副本

谢谢。你的邮件已发送。

发送邮件时发生错误。请稍后再试。