| Annotator Series |
|
| Video input |
|---|
| Number/signal type | 2 RGBHV, RGBS, RGsB, component video (Y, R-Y, B-Y; progressive or HD)
1 RGBHV, RGBS, RGsB, component video (Y, R-Y, B-Y; interlaced, progressive, HD), S-video, composite video
1 component video (Y, R-Y, B-Y; interlaced), S-video, composite video
1 S-video, composite video
1 single link DVI-D
1 optional SDI, HD-SDI |
| Connectors | 2 female 15-pin HD: RGBHV, RGBS, RGsB, component video
5 female BNC: RGBHV, RGBS, RGsB, component video, S-video, composite video
3 female BNC: component video, S-video, composite video
2 female BNC: S-video, composite video
1 female DVI-I: DVI-D
1 female BNC: optional SDI, HD-SDI |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.8 Vp-p for SDI
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.0 V to 2.0 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | Autoscan 15 kHz to 100 kHz |
| Vertical frequency | Autoscan 24 Hz to 120 Hz |
| Resolution range | 640x480 to 1920x1200*, 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p, digitized pixel for pixel; higher resolutions are undersampled.
*Reduced blanking |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 0.5 V |
|
| Video processing |
|---|
| Digital sampling | 30 bit, 10 bits per color; 13.5 MHz standard (video), 165 MHz standard (RGB, YUVp, DVI) |
| Colors | 1 billion, 1024 per color channel |
| Encoder (for scan converted output) | 10 bit digital |
| Horizontal filtering (for scan converted output) | 3 levels |
| Vertical filtering (for scan converted output) | 3 levels |
| Encoder filtering (for scan converted output) | 3 levels |
|
| Video output |
|---|
| Number/signal type | 2 buffered scaled RGBHV, RGBS, RGsB, or HD component video (Y, R-Y, B-Y)
1 MTP
1 optional output in one of the following formats:
• single link DVI-I (for unique scaled output)
• DVI-D
• 3G/HD-SDI
• interlaced RGsB, component video, S-video, composite video |
| Connectors | 6 female BNC: RGB or component video
1 female 15-pin HD: RGB or component video
1 female RJ-45: output to an MTP device
1 slot for an optional output card with one of the following options:
• 1 female DVI-I (analog and digital, unique scaled output)
• 1 female DVI-I (digital output)
• 1 female BNC (3G/HD-SDI output)
• 3 female BNC (interlaced RGsB, component, S-video, composite video output) |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for G of RGsB
0.8 Vp-p for SDI
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | 0.0 V to 1.0 Vp-p |
| Impedance | 75 ohms |
| Scaled resolution | 640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9, 1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9, 1400x10506,8, 1440x9006,8,9, 1600x12006,8, 1680x10506,8, 1920x12006,8
HDTV: 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 1080p CVT8, 2048x10801,2,3,4,5,6,7,8
SDTV: NTSC, PAL (with optional scan converter output card) |
| | 1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RGBcvS, and component video (tri-level or bi-level) |
| Output type | RGBHV, RGBS, RGsB, and component video (tri-level or bi-level) |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM
Optional SDI/HD-SDI: SMPTE 259M-C, SMPTE 292M |
| Input level | 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB |
| Output level | 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB |
| Input impedance | Horizontal: 75 ohms
Vertical: 510 ohms |
| Output impedance | 75 ohms |
| Polarity | Positive or negative (selectable) |
|
| Control/remote — signal processor |
|---|
| Serial control port | 2 RS-232/RS-422, female 9-pin D connectors (rear panel)
1 RS-232, 2.5 mm mini stereo jack (front panel) |
| Baud rate and protocol | 9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations | |
| 9-pin D connector | RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+ |
| 2.5 mm mini stereo jack | Tip = Tx, ring = Rx, sleeve = GND |
| Ethernet control port | 1 RJ-45 female connector |
| Ethernet data rate | 10/100Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet |
| Ethernet default settings | Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
| Web server | Up to 200 simultaneous sessions
40 MB nonvolatile user memory |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Telnet |
|
| Control/remote — annotation |
|---|
| Number/signal type | 20 USB devices (via hubs)
2 serial devices
1 PS/2 mouse
1 PS/2 keyboard |
| Connectors | 2 USB type A
2 RS-232, female 9-pin D (shared with standard control)
2 female PS/2 |
|
| General |
|---|
| Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption | 30 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vented on sides and top |
| Thermal dissipation | 97 BTU/hr |
| Mounting | |
| Rack mount | Yes, with included brackets. |
| Furniture mount | Yes, with optional under-desk or through-desk mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 17.5" W x 12.0" D (1U high, full rack wide)
(4.3 cm H x 44.4 cm W x 30.5 cm D)
(Depth excludes connectors and knobs.) |
| Product weight | 6.8 lbs (3.1 kg) |
| Shipping weight | 11 lbs (5 kg) |
| DIM weight | 12 lbs (6 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-032312-D11) |