| DTP3 T 321 |
|
 Specification |
|---|
 |
| Frame rate1 | 24, 25, 30, 50, or 60 fps |
| Chroma sampling1 | 4:4:4, 4:2:2, or 4:2:0 |
| Color bit depth1 | 8, 10, or 12 bits per color |
| Signal Type | HDMI 2.0b, DisplayPort 1.2 (Alt-Mode), HDCP 2.3 |
| Max. video data rate | 18 Gbps (6 Gbps per color) |
| NOTE | 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate. |
|
|
| Video |
|---|
| Maximum data rate | 18 Gbps (6 Gbps per color) |
| Maximum pixel clock | 600 MHz |
| Resolution range | |
| VESA | 640x480 to 4096x2160 |
| SMPTE | Up to 1080p @ 120 Hz or 4K @ 60 Hz (4:4:4 chroma sampling) |
| Ultra Wide & 5K | 2560x1080, 3440x1440, 3840x1080, 3840x1440, 3840x1600, 5120x1080* @ 30 Hz,
5120x1440* @ 30 Hz |
| NOTE | *Indicated rates not available via standard 256-byte EDID and may require custom video card configuration. |
|
| Horizontal frequency | 15 kHz to 270 kHz for resolutions up to 18 Gbps |
| Vertical frequency | 24 Hz to 240 Hz for resolutions up to 18 Gbps |
| Color bit depth | 8, 10, or 12 bits — subject to the maximum data rate limit |
| Formats | RGB and YCbCr digital video |
| Standards | HDMI 2.0b, USB-C (DP Alt-Mode), HDCP 1.x, HDCP 2.3 |
|
| Video input |
|---|
| Number/signal type | 1 USB-C (DisplayPort Alt Mode, 2 or 4 lanes supported) |
| DisplayPort video | 1 DisplayPort Alt-Mode, DP 1.2 (2 or 4 lanes), RBR/1.62 Gbps, HBR/2.7 Gbps,
HBR2/5.4 Gbps |
| Connectors | 1 female USB Type-C |
| EDID emulation | 128-256 byte EDID support (1-2 blocks) |
|
| Video output |
|---|
| Number/signal type | 1 single link HDMI or DVI-D (Loop through)
1 DTP3 or HDBaseT, configurable |
| Connector | 1 female HDMI
1 female RJ-45 |
|
| Interconnection between transmitter and receiver |
|---|
| Connector | 1 female RJ-45 |
| Termination standard | TIA/EIA T568B |
| Signal transmission distance (using XTP DTP 24 cable) | |
| 1080p @ 60 Hz | Up to 330' (100 m) using shielded twisted pair STP or XTP DTP 24 cable |
| 4K/UHD @ 30 Hz | Up to 330' (100 m) using shielded twisted pair STP or XTP DTP 24 cable |
| 4K/UHD @ 60 Hz (1) | Up to 150' (45 m) using shielded twisted pair STP or XTP DTP 24 cable,
Using 1 coupler with 3' (0.9 m) to 9' (2.7 m) patch cable,
Using 2 couplers with two 3' (0.9 m) (max) patch cables (each patch cable cannot exceed 3'),
Using two punch downs with two 3' (0.9 m) to 9' (2.7 m) patch cables |
| 4K/UHD @ 60 Hz (2) | Up to 175' (53 m) using shielded twisted pair STP or XTP DTP 24 cable with no couplers |
| Cable requirements | Solid conductor, 24 AWG or better
|
| Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) |
| Signal transmission distance (using XTP DTP 22 cable) | |
| 1080p @ 60 Hz | Up to 330' (100 m) using XTP DTP 22 cable |
| 4K @ 30 Hz | Up to 330' (100 m) using XTP DTP 22 cable |
| 4K/UHD @ 60Hz (1), (2) | Up to 330' (100 m) using XTP DTP 22 cable,
Using 1 coupler with 3' (0.9 m) to 16' (4.9 m) patch cable,
Using 2 couplers with 4' (1.2 m) (max) patch cables (each patch cable cannot exceed 4'),
Using two punch downs with 3' (0.9 m) to 8' (2.4 m) patch cables |
| Cable requirements | Solid conductor, 22 AWG or better |
| Cable recommendations | 500 MHz bandwidth, STP (shielded twisted pair) |
| NOTE | Extron XTP DTP 22 shielded twisted pair cable is strongly recommended for optimal performance.
(1) With coupler(s), (2) No coupler(s) |
|
|
| Audio |
|---|
| Sampling rates | 32 kHz, 44.1 kHz, 48 kHs, 96 kHz, 192 kHz |
| Bit depth | 16, 20, 24 bit |
|
| Audio input |
|---|
| Number/signal type | 1 embedded digital audio USB-C |
| Connectors | 1 USB-C (Shared with video input) |
| Source formats | LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos®, Dolby® TrueHD, Dolby Digital Plus™,
Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTSHD
Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital
Surround 5.1, DTS 2 Channel |
|
| USB |
|---|
| USB-C features supported | DisplayPort alt-mode video (2-lane, 4-lane)
USB data
USB-C Power Delivery |
| USB Max data rate | Up to USB 10 Gbps |
| Data transfer types | Bulk, control, interrupt, and isochronous |
| Maximum built-in USB hubs | 2 |
| Optional built-in USB hubs | 1, device hub enabled |
| Minimum built-in USB hubs | 1 |
| NOTE | Transmitter only extends up to USB 2.0 data over the DTP Extension |
|
|
| USB host |
|---|
| Number/signal type | 1 USB |
| Connectors | 1 female, USB 3.2, type C |
| USB Host support | xHCI (USB 3.2), EHCI (USB 2.0), OHCI/UHCI (USB 1.1) |
| USB-C power delivery* | (15W) 5 VDC @ up to 3 A
(27W) 9 VDC @ up to 3 A
(36W) 12 VDC @ up to 3 A
(45W) 15 VDC @ up to 3 A
(60W) 20 VDC @ up to 3 A
(100W) 20 VDC @ up to 5 A ** |
| NOTES | * Up to 60W of power delivery is available without use of a UPI 100
** 100W of power delivery at this power profile when used with UPI 100 |
|
|
| USB-C PWR insert |
|---|
| Number/signal type | 1 USB-C |
| Connectors | (1) 2-pole captive screw, 5mm |
| UPI power support | 25VDC, up to 110W |
|
| USB device ports |
|---|
| Number/signal type | 2 USB |
| Connectors | 2 female, USB 3.2, type-A |
| USB standards | USB 3.2 (compatible), USB 2.0, USB 1.x |
| USB Max data rates | Up to USB 10 Gbps |
| Available USB power | USB-A 3.2: 900 mA/port |
|
| Communications - unit |
|---|
| USB control port | 1 female USB-C on front panel |
| USB standards | USB 2.0 low speed |
| Serial control port | 1 RS-232, 3.5 mm captive screw, 3-pole, rear panel |
| Pin configuration | Pin 1 = Tx, pin 2 = Rx, pin 3 = GND |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Program control | Extron Simple Instruction Set™ (SIS™), Extron Product Configuration Software (PCS) |
|
| Communications - external device (RS-232 over TP) |
|---|
| Serial control pass-through port | RS-232 via (1) 3.5 mm, 3 pole captive screw connector |
| Baud rate and protocol | 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity |
| Serial pin configuration | 1 = Tx, 2 = Rx, 3 = GND |
|
| General |
|---|
| Power supply | Internal
Input: 100 to 240 VAC, 50-60 Hz |
| Power consumption | TBD watts |
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on top and sides |
| Thermal dissipation | TBD BTU/hr |
| Enclosure type | Metal |
| Enclosure dimensions | 1.70" H x 8.68" W x 8.5" D (1U high, half rack wide) |
| Product weight | TBD |
| Mounting |
| Rack mount | Yes, with optional 1U high rack shelf kit |
| Furniture mount | Optional under-desk mount kit |
| Regulatory compliance | CE, c-UL, UL, C-tick, FCC Class A, ICES, VCCI
Complies with appropriate requirements of RoHS, WEEE |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (6604-D2) |