| FOX 500 DA6 |
| NOTE |
The analog RGB input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog RGB in the receiver. |
|
| NOTE | The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver. |
|
|
| Optical specifications |
|---|
| Number/type | 6 fiber optic outputs |
| NOTE | Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication on receiver 1. |
|
| Connectors | 6 LC connectors |
| Operating distance | |
| Singlemode | 30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode unit |
| Multimode | 300 m (985') with 62.5 µm OM1 multimode (MM) cables with an Extron multimode unit
1 km (3280') with 50 µm OM2 multimode (MM) cables with an Extron multimode unit
2 km (6561') with 50 µm OM3/OM4 laser optimized multimode cable with an Extron multimode unit |
| NOTE | Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
| Nominal peak wavelength | 850 nm for FOX 500 DA6 MM, 1310 nm for FOX 500 DA6 SM |
| Data rate | 4.25 Gbps |
| Transmission power | |
| Singlemode | -5 dBm, typical |
| Multimode | -5 dBm, typical |
| Maximum receiver sensitivity | |
| Singlemode | -18 dBm, typical |
| Multimode | -12 dBm, typical |
| Optical loss budget | |
| Singlemode | 13 dB, maximum |
| Multimode | 7 dB, maximum |
|
| Video |
|---|
| Gain | Unity |
| Pixel data bit depth | 8 bits per channel, 3 channels (R, G, B) |
| Maximum resolution | 1600x1200 @ 60 Hz, digitized pixel by pixel; higher resolutions up to 2048x1120, undersampled |
|
| Video input and loop through |
|---|
| Number/signal type | 1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs input
1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs loop-through |
| Connectors | 1 x 5 female BNC or (1) female 15-pin HD for input
(1) female 15-pin HD for loop-through |
| Nominal level | 0.7 Vp-p for RGB |
| Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 24 kHz to 100 kHz |
| Vertical frequency | 40 Hz to 120 Hz |
| Return loss | <-40 dB @ 5 MHz |
| NOTE | These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11. |
|
|
| Video output — See optical specifications above. |
|---|
|
| Sync |
|---|
| Input type | Autodetect RGBHV, RGBS, RGsB, RsGsBs |
| Input level | 2.5 V to 5.0 Vp-p |
| Input impedance | 10k ohms |
| Polarity | Positive or negative (follows input or can be set by user) |
|
| Audio |
|---|
| Gain | |
| Range | Adjustable, -18 dB to +10 dB |
| Default | |
| Captive screw connector | Unbalanced output: -6 dB; balanced output: 0 dB |
| Mini stereo jack | Unbalanced output: 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise | 0.10% @ 1 kHz at nominal level |
| S/N | >80 dB at maximum output (unweighted) |
| CMRR | 65 dB @ 20 Hz to 20 kHz |
| Audio bits per sample | 18 bits per channel, 2 channels (L, R) |
| Sampling rate | 48 kHz |
|
| Audio input |
|---|
| Number/signal type | 2 inputs (mixed): 1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole
(1) 3.5 mm mini stereo jack |
| Impedance | 18k ohms unbalanced, 20k ohms balanced, DC coupled |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level | +17 dBV, (unbalanced) at 1% THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — See FOX 500 Rx receiver specifications. |
|---|
|
| Control/remote |
|---|
| Serial control ports | |
| Control | 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel)
1 RS-232, 2.5 mm mini stereo jack (front panel) |
| Pass-through | 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel); in parallel with
1 RS-232, 2.5 mm mini stereo jack (front panel) |
| Baud rate and protocol | |
| Control | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Pass-through | 9600 to 38400 baud |
| Serial control pin configurations |
| | Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
|
| General |
|---|
| Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption | 14.4 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents on top and side panels |
| Mounting | Rack mountable with included brackets |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 17.4" W x 9.5" D (1U high, full rack wide)
(4.3 cm H x 44.2 cm W x 24.1 cm D)
(Depth excludes connectors.) |
| Product weight | 3.9 lbs (1.8 kg) |
| Shipping weight | 7 lbs (4 kg) |
| DIM weight | |
| USA/Canada | 7 lbs (4 kg) |
| International | 8 lbs (4 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, CUL, FDA Class 1, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-060111-D7) |