| IN1804 Series |
|
 specification |
|---|
 |
| Frame rate1 | 24, 25, 30, 50, 60, 120, 144, or 250 fps |
| Chroma sampling1 | 4:4:4, 4:2:2, and 4:2:0 |
| Color bit depth1 | 8 or 10 bits per color |
| Signal Type | DVI 1.0, HDMI 1.4 and 2.0, DisplayPort 1.2, HDCP 1.4 and 2.3 |
| Max. video data rate1 | |
| HDMI | 18 Gbps (6 Gbps per color) |
| DisplayPort | 21.6 Gbps (5.4 Gbps per lane) |
| NOTE | • 1 Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to
determine video parameters supported by this data rate.
• 2 4096 x 2160/50-60 at 4:4:4 is available only for HDMI and DisplayPort connections. |
|
| NOTE | DTP2 ports are backwards-compatible with DTP endpoints for resolutions up to 4K @ 30 Hz, 4:4:4, or 4K @ 60 Hz, 4:2:0. |
|
|
| Video input |
|---|
| Number/signal type | |
| All models | 1 DisplayPort |
| IN1804 and IN1804 DO | 3 HDMI/DVI |
| IN1804 DI and IN1804 DI/DO | 2 HDMI/DVI
1 DTP/XTP configurable |
| Connectors | |
| All models | 1 female DisplayPort |
| IN1804 and IN1804 DO | 3 female HDMI type A |
| IN1804 DI and IN1804 DI/DO | 2 female HDMI type A
1 female RJ-45 |
| Horizontal frequency | 15 kHz to 270 kHz for resolutions up to 18 Gbps |
| Vertical frequency | 24 Hz to 240 Hz for resolutions up to 18 Gbps |
| Resolution range | 640x480 to 4096x2160, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K
3840x2160 (up to 60 Hz) to 4096x2160 (up to 60 Hz) |
| Input cable equalization | Automatic |
| Input cable length | At 4096x2160@ 60 Hz, 4:4:4, 8 color bits:
HDMI Ultra/DisplayPort Ultra — Up to 12 feet (3.6 meters)
HDMI Pro — 25 feet (7.6 meters) |
| NOTE | Lower resolutions may support longer transmission distances. Transmission distance varies depending on signal resolution, type of cable, and source device used in system. |
|
| Standards | DVI 1.0, HDMI 1.4 and 2.0, DisplayPort 1.2, HDCP 1.4 and 2.3 |
|
| Video processing |
|---|
| Digital sampling | 8 or 10 bits per color; 600 MHz pixel clock maximum |
| Colors | 1.07 billion (10 bit 4:4:4 processing) |
|
| Video output |
|---|
| Number/signal type | |
| IN1804 and IN1804 DI | 2 HDMI/DVI (with CEC) |
| IN1804 DO and IN1804 DI/DO | 1 HDMI/DVI (with CEC)
1 DTP2/XTP/HDBT configurable (with CEC) |
| Connectors | |
| IN1804 and IN1804 DI | 2 female HDMI/DVI type A |
| IN1804 DO and IN1804 DI/DO | 1 female HDMI type A
1 female RJ-45 |
| Power for active cables | |
| IN1804 and IN1804 DI | 2.2 W total power for all HDMI ports
1.1 W max for each HDMI port |
| IN1804 DO and IN1804 DI/DO | 1.1 W max for the HDMI port |
| HDMI peripheral device power | 250 mA per output (HDMI outputs only) |
| Scaled resolution | 640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1440x9008, 1400x10508, 1600x9008, 1600x12008, 1920x12008, 2048x12008, 2048x15368, 2560x10808, 2560x14408, 2560x16008, 3840x21601,2,3,4,5,6*,7*,8*, 4096x21601,2,3,4,5,6**,7**,8**
480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2K1,2,3,4,5,6,7,8
123.98 Hz, 224 Hz, 325 Hz, 429.97 Hz, 530 Hz, 650 Hz, 759.94 Hz, 860 Hz
*Available only over HDMI or DTP2 outputs
**Available only over HDMI outputs |
| Output cable length | At 4096x2160 @ 60 Hz, 4:4:4, 8 color bits:
HDMI Ultra — Up to 9 feet (2.7 meters)
HDMI Pro — Up to 25 feet (7.6 meters) |
| NOTE | Lower resolutions may support longer transmission distances. Transmission distance varies depending on the signal resolution, type of cable, and equalization capabilities of the display in the system. |
|
| Standards | DVI 1.0, HDMI 1.4 and v2.0, HDCP 1.4 and 2.3 |
|
| Audio |
|---|
| Gain | Unbalanced output: -6 dB; balanced output: 0 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise | <0.1%, 20 Hz to 20 kHz at nominal level |
| S/N | >90 dB at maximum balanced output (unweighted) |
| Crosstalk | ≤-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation | >80 dB @ 1 kHz |
| Supported formats | |
| Analog de-embedding | LPCM up to 2.0/24-bit/96 kHz |
| HDMI pass-through | LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos, Dolby TrueHD, and Dolby legacy formats; DTS:X, DTS-HD Master Audio, DTS 96/24, and DTS legacy formats |
|
| Audio input |
|---|
| Number/signal type | |
| IN1804 and IN1804 DO | 1 stereo, line level, balanced or unbalanced
4 embedded HDMI/DisplayPort |
| IN1804 DI and IN1804 DI/DO | 2 stereo line level, balanced or unbalanced (1 analog, 1 DTP2)
3 embedded HDMI/DisplayPort
1 embedded DTP2/XTP |
| Connectors | |
| IN1804 and IN1804 DO | (1) 3.5 mm, 5 pole captive screw
1 female DisplayPort
3 female HDMI type A |
| IN1804 DI and IN1804 DI/DO | (1) 3.5 mm, 5 pole captive screw
1 female DisplayPort
2 female HDMI type A
1 female RJ-45 |
| Impedance | >10k ohms unbalanced, >20k ohms balanced |
| Nominal level | Line input: +4 dBu (1.23 Vrms), -10 dBV (316 mVrms), adjustable |
| Maximum level | +21 dBu balanced, +15 dBu unbalanced |
| CMRR | >65 dB @ 1 kHz |
| Input gain adjustment | -18 dB to +24 dB (analog input only) |
| NOTE | Unbalanced analog inputs applied at a DTP2 transmitter input have +12 dB of gain applied to bring the signal to a nominal level (IN1804 DI and IN1804 DI/DO only). |
|
|
| Audio output |
|---|
| Number/signal type | |
| All models | 1 stereo/mono, balanced or unbalanced |
| IN1804 and IN1804 DI | 2 HDMI, embedded |
| IN1804 DO and IN1804 DI/DO | 1 HDMI, embedded
1 DTP2/XTP/HDBT (embedded digital and remote balanced/unbalanced analog*)
*Available only in DTP2 mode |
| Connectors | |
| All models | (1) 3.5 mm, 5 pole captive screw |
| IN1804 and IN1804 DI | 2 female HDMI type A |
| IN1804 DO and IN1804 DI/DO | 1 female HDMI type A
1 female RJ-45 |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.5 dB channel to channel |
| Maximum level (Hi-Z) | >+21 dBu, balanced; >+15 dBu, unbalanced |
| Output volume range | 0 to -100 dB in 1 dB steps |
| NOTE | System gain for the analog DTP2 receiver output is rated at -12 dB (unbalanced) and -6 dB (balanced) (IN1804 DO and IN1804 DI/DO only). |
|
|
| Communications — scaling presentation switcher |
|---|
| Serial control port | 1 bidirectional RS-232, 3.5 mm, 3 pole captive screw connector (rear panel) |
| Baud rate and protocol | 9600, 8 data bits, 1 stop bit, no parity (default) |
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd |
| USB control port | 1 female mini USB B (front panel ) |
| USB standards | USB 2.0, high speed |
| Ethernet | |
| Connector | 1 female RJ-45 |
| Ethernet data rate | 10/100/1000Base-T, half/full duplex with autodetect |
| Ethernet protocol | ARP, DHCP, DNS, HTTP (redirect), HTTPS, IEEE 802.1X, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, Telnet, UDP/IP |
| Ethernet default settings | Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
| Storage | 512 MB user memory |
| Contact/tally ports | 7 sets (2 pins each) of contact and tally ports
1 set (1 pin each) of +V and G
Tally output power +5 VDC, 0.2 A |
| Program control | Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® |
|
| Communications — external device (RS-232/IR over DTP2/XTP/HDBaseT) |
|---|
| Serial control pass-through port | RS-232 can be transmitted to and from twisted pair endpoints via Ethernet insertion (IN1804 DI, IN1804 DO, and IN1804 DI/DO only). |
| Baud rates | Up to 115200 baud |
| Protocol | 6 - 8 data bits
1 or 2 stop bits
Even or odd parity, no parity
Flow control = XON, XOFF, none |
| IR control pass-through ports | TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz |
| IN1804 DI and IN1804 DI/DO input/TP Tx | IR via (1) 3.5 mm, 3 pole captive screw connectors |
| IN1804 DO and IN1804 DI/DO output/TP Rx | IR via (1) 3.5 mm, 3 pole captive screw connector |
| IR control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd |
|
| General |
|---|
| Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption | |
| Full power | |
| IN1804 | 29 watts |
| IN1804 DI | 46 watts |
| IN1804 DO | 42 watts |
| IN1804 DI/DO | 57 watts |
| Power save mode | |
| IN1804 | 16 watts |
| IN1804 DI | 17 watts (24 watts for Psav2) |
| IN1804 DO | 19 watts (24 watts for Psav2) |
| IN1804 DI/DO | 18 watts (33 watts for Psav2) |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | 2 fans, air flows front to rear |
| Thermal dissipation | |
| Full power | |
| IN1804 | 94 BTU/hr |
| IN1804 DI | 127 BTU/hr |
| IN1804 DO | 124 BTU/hr |
| IN1804 DI/DO | 156 BTU/hr |
| Power save mode | |
| IN1804 | 50 BTU/hr |
| IN1804 DI | 54 BTU/hr (74 BTU/hr for Psav2) |
| IN1804 DO | 61 BTU/hr (67 BTU/hr for Psav2) |
| IN1804 DI/DO | 56 BTU/hr (92 BTU/hr for Psav2) |
| Mounting | |
| Rack mount | Yes, with optional rack shelf |
| Furniture mount | Yes, with optional under-desk or through-desk mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.66" H x 8.68" W x 11.5" D (1U high, half rack wide)
(42 mm H x 220 mm W x 292 mm D)
(Depth excludes connectors and buttons.) |
| Product weight | |
| IN1804 | 2.9 lbs (1.3 kg) |
| IN1804 DI | 2.9 lbs (1.3 kg) |
| IN1804 DO | 2.9 lbs (1.3 kg) |
| IN1804 DI/DO | 2.9 lbs (1.3 kg) |
| Regulatory compliance | CE, c-UL, UL, PSE, RoHs, and WEEE |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor
|
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (5942-D12) |