IPL 500 停产

IP Link ® 以太网控制处理器
主要特性
  • 与 TouchLink 控制系统相兼容
  • 8 个双向 RS-232 端口
  • 8 个可配置的、用于外围设备单向控制的红外/串行端口
  • 8 个用于控制房间功能的继电器
  • 4 个开关式直流电源端口
  • 支持最多 6 个 TouchLink 触摸屏
The Extron IPL 500
型号 产品说明 产品编号
 IPL 500 IP Link 以太网控制处理器 60-1071-01 停产

该产品已停产。

IPL 500 是一款以太网控制处理器,可用作TouchLinkTM 可配置触摸屏控制系统的一部分。IPL 500 提供了关键的视音频系统控制功能,包括双向串行端口、可配置的单向红外/串行端口、以太网驱动端口、灵活的输入输出端口和继电器,用于和显示设备、切换器、信号源、屏幕控制、灯光系统及其它设备的连接。IPL 500 可通过 Extron 免费的、简单易用的全局配置器软件进行配置。使用免费的、基于 Web 的视音频资源管理和远程控制程序 – 全局察看器(GlobalViewer®),用户可以通过 IPL 500 在以太网上对 Extron 和第三方设备如投影机、平板显示器、监视器、VCR、DVD 播放器及其它设备进行管理和监控。

特性

  • 与 TouchLink 控制系统相兼容
  • 8 个双向 RS-232 端口
  • 8 个可配置的、用于外围设备单向控制的红外/串行端口
  • 8 个用于控制房间功能的继电器
  • 4 个开关式直流电源端口
  • 支持最多 6 个 TouchLink 触摸屏
  • 4 个灵活的输入输出 (Flex I/O) 端口
  • 支持以太网设备驱动
  • IP Link®以太网监视与控制
  • 免费的全局配置器 – 易于使用的配置器软件
  • 内置高性能 Web 服务器
  • 大量的经过 Extron 认证的设备驱动程序库

技术参数

IPL 500
Ethernet control interface
   Connectors 1 RJ-45 female connector
   Data rate 10/100Base-T, half/full duplex with autodetect
   Protocols ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
   Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
48 MB nonvolatile user memory
   Program control Extron Global Configurator for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer®, Telnet
   Global Viewer requirements Microsoft® Internet Explorer® ver. 6 or higher
Serial control interface
   Quantity/type 2 bidirectional RS-232, RS-422, RS-485
6 bidirectional RS-232
   Connectors (2) 3.5 mm captive screw connectors, 5 pole
(6) 3.5 mm captive screw connectors, 3 pole
   Baud rate and protocol 300 to 115200 baud
Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity
    NOTE     The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
   Pin configurations 
      Serial, 5-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = GND, 4 = RTS, 5 = CTS
      Serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = GND
Flex I/O control interface
   Quantity/type 4 analog input or digital input/output (configurable)
   Connectors (1) 3.5 mm captive screw connector, 5 pole
   Digital inputs 
      Input voltage range 0 to 24 VDC, clamped at +30 VDC
      Input impedance 28k ohms
      Programmable pullup 2k ohms to +5 VDC
      Threshold low to high Programmable range: 100 mV to 24 VDC, default = 2 VDC
      Threshold high to low Programmable range: 100 mV to 24 VDC, default = 1 VDC
   Digital outputs 250 mA sink from 24 VDC max.
   Analog inputs 12 bit A/D, 0 to 24 VDC
   Pin configurations 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = GND
Control — IR/serial ports
   Quantity/type 8 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 1 MHz
   Connectors (4) 3.5 mm captive screw connectors, 4-pole
   Baud rate and protocol (RS-232) 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), or even or odd parity
   Pin configurations For each port, pin 1 = signal, 2 = GND
   IR output carrier frequency 30 kHz to 1 MHz
   IR learning carrier frequency 30 kHz to 1 MHz
   IR learning frequencies 30 kHz to 150 kHz
   IR learning capture distance 2" (5.1 cm) to 12" (30.5 cm) from the front panel
Relay control interface
   Quantity/type 8 normally open relays
   Relay control connectors (4) 3.5 mm captive screw connectors, 4 pole
   Relay control contact rating 24 V, 1 A
Switched DC power output
   Quantity/type 4 switched 12 VDC outputs
   Connectors (4) 3.5 mm captive screw connectors, 2 pole
   Power Maximum 40 watts total
   Power sense 
      Range 0.1 watt to 40 watts
General
   Power 100 VAC to 240 VAC, 50-60 Hz, 65 watts, internal
   Ambient temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Rack mount Yes, with optional 1U rack shelf
   Enclosure type  Metal
   Enclosure dimensions 1.7" H x 8.7" W x 10.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 26.7 cm D)
(Depth excludes connectors.)
   Product weight  2.5 lbs (1.1 kg)
   Shipping weight  5 lbs (3 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
Meets UL 60950 for safety.
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
      Environmental Complies with the appropriate requirements of RoHS, WEEE
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.0-081210-D4)

示意图

IPL 500 System Diagram

面板图

IPL 500 Panel Drawing