| IPL T PC1, IPL T PC1i |
|
| AC control interface |
|---|
| Connectors | |
| IPL T PC1 | 1 female USA/Edison power connector |
| IPL T PC1i | 1 female IEC power connector |
| Voltage | |
| IPL T PC1 | 120 VAC, 50-60 Hz |
| IPL T PC1i | 220 VAC, 50-60 Hz |
| Maximum AC load | |
| IPL T PC1 | 12 A, 1440 watts at 120 VAC |
| IPL T PC1i | 10 A, 2200 watts at 220 VAC |
|
| Serial control interface |
|---|
| Serial control port | (1) RS-232 only, 3.5 mm captive screw connector, 4 pole |
| Baud rate and protocol | 115200 to 300 baud (9600 baud = default) ; 8 (default) or 7 data bits; 1(default) or 2 stop bits; no parity (default), or even or odd parity |
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND, 4 = +5 VDC |
|
| Ethernet control interface |
|---|
| Connector | 1 female RJ-45 connector |
| Data rate | 10/100Base-T, half/full duplex with autodetect |
| Protocols | ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet |
| Default settings | Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off |
| Web server | Up to 200 simultaneous sessions
7.25 MB nonvolatile user memory |
| Program control | Extron Simple Instruction Set (SIS™) |
| Global Viewer requirements | Microsoft® Internet Explorer ver. 6 or higher |
|
| Contact closure interface — input only |
|---|
| Quantity/type | 1 contact closure input |
| Contact input control connector | (1) 3.5 mm captive screw connector, 4 pole (shared with IR output port) |
| Contact closure (input only) | |
| Input voltage range | 0 to 5 VDC, clamped at +5.1 V |
| Input impedance | 10k ohms |
| Threshold | 1.6 VDC |
| Pin configuration | 1 = contact input, 2 = GND |
|
| IR control interface |
|---|
| IR control port | (1) 3.5 mm captive screw connector, 4 pole (shared with contact closure input port) |
| Pin configuration | 3 = S (IR signal output), 4 = GND |
| IR output carrier frequency | 30 kHz to 1 MHz |
|
| General |
|---|
| Power input | Internal
100-240 VAC, 50-60 Hz
5 watts |
| IPL T PC1 | 12 A (max.) |
| IPL T PC1i | 10 A (max.) |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf |
| Furniture mount | Yes, with optional under desk mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.) |
| Product weight | 1.0 lbs (0.5 kg) |
| Shipping weight | 3 lbs (2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance | |
| Safety | |
| IPL T PC1 | CE, c-UL, UL |
| IPL T PC1i | CE |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-081111-D5) |