IPL T SF24 停产

两个串口及四个多用途输入输出口(Flex I/O)端口IP Link®以太网控制接口
主要特性
  • 2个串行端口
  • 4个多用途输入输出口(Flex I/O)端口可以设置成输入或输出,并可与如继电器、发光二级管、白炽灯及开关之类的装置接口
  • 允许从任何连接了局域网、广域网或因特网的计算机访问、控制及监视视听设备
  • 能够运行复杂的用户可编程语言
  • 使用标准以太网通信协议
  • 带1.25MB动态存储器的高性能网络服务器
The Extron IPL T SF24
型号 产品说明 产品编号
 IPL T SF24 Two serial, four Flex I/O 60-544-02 停产

该产品已停产。

Extron IPL T SF24是一种结构紧凑的以太网控制接口,带有集成式网络服务器、两个串行端口及四个多用途输入输出口(Flex I/O)。通过这接口,每一台连接了局域网、广域网或因特网的计算机都能够控制、监视及访问几乎任何一台视听设备。IP连通性让用户能够在远处主动监控投影器、等离子显示屏、切换台及其他串行控制(RS-232、RS-422、RS-485)的产品并排除故障。IPL T SF24使用Extron独有的IP Link®技术,它是一种高性能智能网络解决方案,设计用于满足专业视听环境的需要,如大至大学和公司,小至家用安装等。技术人员或管理员可以借助这接口,在任何时间,在任何带网络浏览器的计算机上管理和支持多台设以太网的视听设备。

特性

  • 2个串行端口
  • 4个多用途输入输出口(Flex I/O)端口可以设置成输入或输出,并可与如继电器、发光二级管、白炽灯及开关之类的装置接口
  • 允许从任何连接了局域网、广域网或因特网的计算机访问、控制及监视视听设备
  • 能够运行复杂的用户可编程语言
  • 使用标准以太网通信协议
  • 带1.25MB动态存储器的高性能网络服务器
  • 多用户支持,能同时支持200项任务
  • IP Link全局查看(Global Viewer)软件允许用户监控并调度连接了IP Link产品的串行控制产品的各项功能
  • 带加密口令保护的两级安全措施
  • 集成入现有视听系统,还可继续使用原有控制系统
  • 安装在1/4机架宽、1U高的金属机箱内
可选附件
  RSF 123 用于 3.5" 深产品的机架搁板套件
  RSU 129 用于 9.5" 深产品的通用型机架搁板套件

技术参数

IPL T SF24, IPL T SFI244
Ethernet control interface
   Connectors 1 RJ-45 female connector
   Data rate 10/100Base-T, half/full duplex with autodetect
   Protocols ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
   Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
   Web server Up to 200 simultaneous sessions
      IPL T SF24 1.25 MB nonvolatile user memory
      IPL T SFI244 7.25 MB nonvolatile user memory
   Program control Extron's Simple Instruction Set (SIS)
   Global Viewer requirements Microsoft® Internet Explorer ver. 6 or higher
Serial control interface
   Quantity/type 
      IPL T SF24 2 RS-232/RS-422/RS-485 configurable serial
      IPL T SFI244 2 RS-232 only
   Connectors 
      IPL T SF24 (2) 9-pin male D and (1) 3.5 mm captive screw connector, 5 pole
      IPL T SFI244 (1) 3.5 mm captive screw connector, 5 pole
   Baud rate and protocol 300 to 115200 baud
Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity
   Pin configurations 
      Serial, 9-pin D — IPL T SF24
         RS-232 (default) 2 = RX, 3 = TX, 5 = GND, 7 = RTS, 8 = CTS
         RS-422 2 = RX-, 3 = TX-, 5 = GND, 7 = TX+, 8 = RX+
         RS-485 2 and 3 (tied together) = data-, 5 = GND, 7 and 8 (tied together) = data+
      Serial, 5-pole captive screw — both models 
          COM1: pin 1 = TX, 2 = RX, 3 = GND
COM2: pin 4 = TX, 5 = RX, 3 = GND
Flex I/O control interface
   Quantity/type 4 analog input or digital input/output(configurable)
   Connectors (1) 3.5 mm captive screw connector, 5 pole
   Digital inputs 
      Input voltage range 0 to 24 VDC, clamped at +30 VDC
      Input impedance 28k ohms
      Programmable pullup 2k ohms to +5 VDC
      Threshold low to high Programmable range: 100 mV to 24 VDC, default = 2 VDC
      Threshold high to low Programmable range: 100 mV to 24 VDC, default = 1 VDC
   Digital outputs 250 mA sink from 24 VDC max.
   Analog inputs  12 bit A/D, 0 to 24 VDC
   Pin configurations 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = GND
IR control interface — IPL T SFI244 only
   Quantity/type 4 IR
   Connectors (1) 3.5 mm captive screw connector, 8 pole
   IR output carrier frequency 30 kHz to 1 MHz
   Pin configurations Pins 1, 3, 5, 7 = S 1, S2, S3, S4
Pins 2, 4, 6, 8 = GND
   IR learning carrier frequency 30 kHz to 1 MHz
   IR learning capture distance 2" (5.1 cm) to 12" (30.5 cm) from the front panel
General
   Power Supplied by an included external power supply
   External Power supply 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
   Power input requirements  12 VDC, 0.5 A
   Ambient temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting
      Rack mount Yes, with optional 1U, 9.5" deep rack shelf kit, part #60-190-01 (RSU 129); 6" rack shelf kit, part #60-190-10 (RSU 126) or 60-604-10 (RSB 126) or 3.5" deep rack shelf kit, part #60-190-20 (RSF 123)
      Furniture mount Yes, with optional under-desk mounting kit, part #70-212-01 (MBU 123)
      Pole mount Yes, with optional mini pole mount kit, part #70-217-01 (PMK 100)
   Enclosure type  Metal
   Enclosure dimensions 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight  0.7 lbs (0.3 kg)
   Shipping weight  2 lbs (1 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, CUL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(7.6-020409-D11)

示意图

IPL T SF24 System Diagram

面板图

IPL T SF24 Panel Drawing