| P/2 DA2 D |
|
| Video |
|---|
| Gain | Main output: 0 dB, 0.6 dB, 1.2 dB, selectable
Local monitor output: unity |
| Bandwidth | 350 MHz (-3 dB) |
| NOTE | ID bits can be terminated (pins 4 and 11) via a switch setting. |
|
|
| Video input |
|---|
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video input |
| Connectors | 1 female 15-pin HD |
| Pin connections | ID bits on pins 4 and 11: selectably terminated to ground or passed through to local monitor output (loop-through)
ID bits on pins 12 and 15: passed through to local monitor output (loop-through)
Pin 9: pass-through connection to local monitor output |
| Nominal level | 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels | Analog: 0.4 V to 1.4 Vp-p with no offset at unity gain |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 135 kHz |
| Vertical frequency | 30 Hz to 170 Hz |
| Return loss | <-38 dB @ 5 MHz |
| Input coupling | DC |
|
| Video output |
|---|
| Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video main output
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video local monitor output |
| Connectors | |
| Main output | 5 female BNC on 3" pigtails |
| Local monitor | 1 female 15-pin HD |
| Nominal level | 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels | Analog: 0.4 V to 1.4 Vp-p (follows input) |
| Impedance | 75 ohms |
| Return loss | <-38 dB @ 5 MHz |
| DC offset | ±5 mV with input at 0 offset |
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync |
| Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync |
| Input level | 3.0 V to 5.0 Vp-p |
| Output level | 0.3 Vp-p for component video (bi-level sync)
0.6 Vp-p for component video (tri-level sync)
TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS |
| Input impedance | 510 ohms or 10k ohm, switch selectable |
| Output impedance | 75 ohms |
| Max. propagation delay | 60 ns |
| Max. rise/fall time | 4 ns |
| Polarity | Positive or negative (follows input) |
|
| Audio |
|---|
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
| THD + Noise | 0.03% @ 1 kHz at nominal level |
| S/N | >90 dB at maximum output (unweighted) |
| Stereo channel separation | >80 dB @ 1 kHz |
|
| Audio input |
|---|
| Number/signal type | 1 stereo, unbalanced |
| Connectors | (1) 3.5 mm mini stereo jack (tip, ring, sleeve) |
| Impedance | >18k ohms unbalanced, DC coupled |
| Nominal level | -10 dBV (316 mVrms) |
| Maximum level | +10 dBV, (unbalanced) at 1% THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | 1 stereo or dual mono (switch selectable), balanced/unbalanced |
| Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.5 dB channel to channel |
| Maximum level (Hi-Z) | +15 dBu, balanced or unbalanced, at 1% THD+N |
| Maximum level (600 ohm) | +9 dBm, balanced or unbalanced, at 1% THD+N |
|
| General |
|---|
| External Power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements | 12 VDC, 0.2 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Mounting | |
| Furniture or wall mount | Yes, in a standard U.S. electrical wall box |
| Enclosure type | Metal faceplate and a plastic decorator-style wall plate. |
| Enclosure dimensions | |
| Faceplate | 2.6" H* x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang decorator-style faceplate. *Height is 3.8" [9.7 cm] including mounting tabs.) |
| Buffer | 2.7" H x 1.8" W x 0.75" D*
(6.9 cm H x 4.6 cm W x 1.9 cm D*)
(*Depth excludes BNC connectors and cables.) |
| Product weight | 0.2 lbs (0.1 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (4010-D6-042017) |