| SW MTP T 15HD A Series Transmitters |
|
| Video |
|---|
| Number/signal type | 1 set of proprietary analog signals |
| Connectors | 1 female RJ-45 |
|
| Video input |
|---|
| Number/signal type | 2, 4, or 6 (depending on the model) analog VGA-UXGA RGBHV, RGBS, RGsB, component video, S-video or composite video |
| Connectors | 2, 4, or 6 (depending on the model) female 15-pin HD |
| Nominal level | 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels | Analog: 0.3 V to 1 Vp-p with no offset |
| Impedance | 75 ohms |
| Horizontal frequency | 15 kHz to 130 kHz |
| Vertical frequency | 30 Hz to 150 Hz |
| Return loss | <-30 dB @ 5 MHz |
| DC offset (max. allowable) | 2 V |
|
| Video output — refer to twisted pair receivers' specifications and manuals |
|---|
|
| Sync |
|---|
| Input type | RGBHV, RGBS, RGsB |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level | 2.5 V to 5.5 Vp-p |
| Input impedance | 560 ohms |
| Max. input voltage | 5.5 V |
|
| Audio |
|---|
| Number/signal type | 1 set of proprietary analog signals |
| Connectors | 1 female RJ-45 |
| Gain | 0 dB (unbalanced), +6 dB (balanced) |
| Frequency response | 20 Hz to 20 kHz, ±1 dB |
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz |
| S/N | >75 dB at maximum output, unweighted |
| Crosstalk | <-70 dB,@ 20 Hz to 20 kHz, +4 dBu stereo output |
| Stereo channel separation | >62 dB @ 20 Hz to 20 kHz |
| CMRR | >43 dB @ 20 Hz to 20 kHz |
|
| Audio input |
|---|
| Number/signal type | 2, 4, or 6 (depending on the model) stereo, unbalanced |
| Connectors | 2, 4, or 6 (depending on the model) 3.5 mm mini audio jacks (tip, ring, sleeve) |
| Impedance | >10k ohms unbalanced |
| Nominal level | -10 dBV (316 mVrms) |
| Maximum level | +15 dBV, unbalanced, at <1% THD+N |
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output |
|---|
| Number/signal type | 1 set of proprietary analog signals to be sent to an MTP receiver
1 stereo, balanced/unbalanced |
| Connectors | 1 female RJ-45 (for proprietary signals)
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced (for the stereo output) |
| Gain error | ±1 dB channel to channel (for stereo output) |
| Maximum level (Hi-Z) | >+23 dBu, balanced, at <1% THD+N (for stereo output) |
| Maximum level (600 ohm) | >+17 dBu, balanced at <1% THD+N (for stereo output) |
| Stereo channel separation | >60 dB @ 1 kHz |
|
| Control/remote — switcher/transmitter |
|---|
| Serial control port | RS-232, 9-pin female D connector (shared with contact closure) |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations | 2 = TX, 3 = RX, 5 = GND |
| Contact closure | RS-232, 9-pin female D connector (shared with serial control) |
| Contact closure pin configurations | 1 = input 1, 4 = input 2, 5 = GND, 6 = input 3, 7 = input 4, 8 = input 5, 9 = input 6 |
| Program control | Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
|---|
| Power | Supplied by an external power supply |
| NOTE | The SW MTP Series transmitters cannot supply remote power to or receive remote power from attached receivers. |
|
| External Power supply | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated |
| Power input requirements | 12 VDC, 0.6 A |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, unvented |
| Rack mount | Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 or 60-604-01; or VersaTools® 3.5" deep rack shelf, part #60-190-20 or 60-604-20.
Also furniture mountable with optional Under-Desk Mounting Kit #70-212-01 |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 7.6 cm D
(Depth excludes connectors and toggle switch.) |
| Product weight | 0.8 lbs (0.4 kg) |
| Shipping weight | 3 lbs (2 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Listings | UL, CUL |
| Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
| Product warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (7.51-101907-D6) |