| SW HD 4K Series |
|
 specification |
|---|
 |
| Frame rate1 | 24, 25, 30, 50, or 60 fps |
| Chroma sampling1 | 4:4:4, 4:2:2, or 4:2:0 |
| Color bit depth1 | 8 bits per color |
| Signal Type | HDMI 1.4, HDCP 1.4 |
| Max. video data rate | 10.2 Gbps (3.4 Gbps per color) |
| NOTE | 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate. |
|
|
| Video |
|---|
| Maximum data rate | 10.2 Gbps (3.4 Gbps per color) |
| Maximum pixel clock | 300 MHz (600MHz for 4K with 4:2:0 chroma subsampling) |
| Resolution | Up to 1920 x 1200 or 1080p @ 60 Hz, 12-bit color
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling |
| Formats | RGB and YCbCr digital video |
| Standards | DVI 1.0, HDMI 1.4, HDCP 1.4 |
| NOTE | The SW HD 4K Series switchers support TMDS data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI specification features.
**Extron strongly recommends compatibility testing while designing and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The 3D support in this product is limited to signals operating within 164 MHz pixel clock and requires format and EDID compatibility between source and sink devices. Please contact an Extron Application Engineer for more information.
|
|
|
| Video input |
|---|
| Number/signal type | 2, 4, 6, or 8 (depending on model) single link HDMI (or DVI-D*) |
| Connectors | 2, 4, 6, or 8 female HDMI |
|
| Video output |
|---|
| Number/signal type | 1 single link HDMI (or DVI-D*) |
| Connectors | 1 female HDMI |
| Power for active cables | 1.1 W max. for the HDMI port |
| NOTE | *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
|
| Communication — Switcher |
|---|
| Serial control port | 1 RS-232, 3.5 mm, 3 pole captive screw connector |
| Pin configuration | 1 = Tx, 2 = Rx, 3 = GND |
| Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
| Auto-input switching | (1) 3.5 mm, 2 pole captive screw connector |
| Pin configuration | Pins 1 and 2 of captive screw connector shorted together enable auto-input switching |
| Contact closure | |
| SW2 HD 4K | (2) 3.5 mm captive screw, 3 pole (shared with Tally output) |
| SW4 HD 4K | (4) 3.5 mm captive screw, 3 pole (shared with Tally output) |
| SW6 HD 4K | (6) 3.5 mm captive screw, 3 pole (shared with Tally output) |
| SW8 HD 4K | (8) 3.5 mm captive screw, 3 pole (shared with Tally output) |
| Tally output | |
| SW2 HD 4K | (2) 3.5 mm captive screw, 3 pole (shared with Contact closure) |
| SW4 HD 4K | (4) 3.5 mm captive screw, 3 pole (shared with Contact closure) |
| SW6 HD 4K | (6) 3.5 mm captive screw, 3 pole (shared with Contact closure) |
| SW8 HD 4K | (8) 3.5 mm captive screw, 3 pole (shared with Contact closure) |
| Tally output power | (1) 3.5 mm captive screw, 3 pole for +5 VDC, 0.2 A |
| IR controller module | IR 102 remote control (optional)
30' maximum, 40 degrees off axis |
| Program control | Extron Simple Instruction Set™ (SIS™) |
|
| General |
|---|
| Power supply | |
| SW2 HD 4K, SW4 HD 4K | External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts |
| SW6 HD 4K, SW8 HD 4K | Internal
Input: 100-240 VAC, 50-60 Hz |
| Power consumption | |
| SW2 HD 4K, SW4 HD 4K | |
| Device | 6 watts, 12 VDC |
| Device and power supply | 8 watts, 12 VDC |
| SW6 HD 4K, SW8 HD 4K | 13.1 watts |
| Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, no vents |
| Thermal dissipation | |
| SW2 HD 4K, SW4 HD 4K | |
| Device | 19.8 BTU/hr |
| Device and power supply | 24.4 BTU/hr |
| SW6 HD 4K, SW8 HD 4K | 43.6 BTU/hr |
| Mounting | |
| SW2 HD 4K, SW4 HD 4K |
| Rack mount | Yes, with optional 1U rack shelf |
| Furniture mount | Yes, with optional under-desk mounting kit or through-desk mounting kit |
| SW6 HD 4K, SW8 HD 4K |
| Rack mount | Yes, with supplied mounting brackets |
| Enclosure type | Metal |
| Enclosure dimensions | |
| SW2 HD 4K, SW4 HD 4K | 1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 7.6 cm D)
(Depth excludes connectors.) |
| SW6 HD 4K, SW8 HD 4K | 1.75" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.) |
| Product weight | |
| SW2 HD 4K, SW4 HD 4K | 0.5 lb (0.3 kg) |
| SW6 HD 4K, SW8 HD 4K | 2.5 lbs (1.1 kg) |
| Regulatory compliance | CE, C-tick, c-UL, KC-mark, UL, FCC Class A, ICES, VCCI
Complies with appropriate requirements of RoHs and WEEE. |
| Product warranty | 3 years parts and labor |
| Everlast power supply warranty | 7 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (4963-D10) |