| TeamWork 400 Kit |
|
 |
|---|
|
| Switcher |
|---|
 |
| Frame rate | 24, 25, 30, 50, 60, 120, 144, 240 fps |
| Chroma sampling | 4:4:4, 4:2:2, or 4:2:0 |
| Color bit depth | 8, 10, or 12 bits per color |
| Signal type | HDMI 2.0b, HDCP 2.3 |
| Maximum data rate | 18 Gbps (6 Gbps/color) |
| NOTE | 1Subject to maximum data rate limit. Use our data rate calculator at www.extron.com/8kdatarate to determine video parameters supported by this data rate. |
|
| NOTE | *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
| Maximum pixel clock | 600 MHz |
| Resolution | Up to 1920x1200 or 1080p @ 60 Hz, 12-bit color,
4K (4096x2160) @ 60 Hz with 4:4:4 color space, 8 bit color (Max for HDMI)
UHD (3840x2160) @ 60Hz with 4:4:4 color space, 8 bit color |
| Serial control port | (1) RS-232, 3.5 mm captive screw connector, 3 pole |
| Contact closure/tally output | (1) 3.5 mm captive screw connector, 5 pole (C,T,C, T, + V)
(1) 3.5 mm captive screw connector, 4 pole (C,T,C, T) |
| Power supply | External,
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts |
| Power consumption | |
| Device | 3.9 watts, 12 VDC |
| Device and power supply | 5.5 watts, 12 VDC |
| Enclosure dimensions | 1.75" H x 8.75" W x 6.00" D (1U high, half rack wide)
(44 mm H x 222 mm W x 152 mm D)
(Depth excludes connectors) |
|
| System Controller |
|---|
| Connectors | |
| Input | 1 male IEC power connector, 6" (152 mm) |
| Output | 1 female IEC power connector, 6" (152 mm) |
| NOTE | 1 male IEC to female Edison adapter is included |
|
| Voltage output | 100-240 VAC, 50-60 Hz |
| Maximum AC load | 10 A, 1106 watts at 120 VAC
10 A, 2260 watts at 220 VAC |
| Serial control port | (1) RS-232, 3.5 mm captive screw connector, 3 pole |
| Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND |
| Power supply | Internal:
Input: 100-240 VAC, 50-60 Hz |
| Enclosure dimensions | 1.7" H x 4.3" W x 8.0" D (1U high, quarter rack wide)
(43 mm H x 109 mm W x 203 mm D)
(Depth excludes connectors) |
|
| Cable Cubby |
|---|
| Min./max. table thickness | 0.50" to 2.50" (13 mm to 64 mm) |
| Top plate (outer rim) | 10.57" W x 4.58" D (269 mm W x 116 mm D) |
| Enclosure depth | 4.46" H (113 mm H) |
| Surface cutout (inside rim) | 10.0" W x 4.0" D (254 mm W x 102 mm D) |
|
| HDMI SM Show Me Cable |
|---|
| Standards | High speed HDMI® cable |
| Resolution range | HDMI cable:
Up to 4K @ 60 Hz (4096x2160) or UHD @ 60 Hz (3840x2160)
8 bit color depth, max. 18.0 Gbps data rate |
| Contacts | Gold Plated |
| Material | Conductors: tinned copper, 30 AWG
Drain wire: tinned copper, 32 AWG
Shielding: fluorocopolymer tape binder, tinned copper braid |
| Overall length | 6' (1.8 m) measured neck-to-neck |
|
| General |
|---|
| Regulatory compliance | |
| Accessibility | Complies with the appropriate requirements of section 508 of the Rehabilitation Act
(29 U.S.C. 794d). |
| Product warranty | 3 years parts and labor |
| NOTE | For the complete specifications for each component of the kit, see www.extron.com.
Specifications are subject to change without notice. |
|
| (5387-D9) |