Cable Cubby 1202
用于视音频连接、远程控制和电源的电缆安装接线盒
Cable Cubby 1202
建筑工程规范
选择一个产品编号：
复制文本
已复制！
发生错误。请稍后重试。
Cable Cubby 1202 Black, AC Module Not Included
- Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, control modules, and cable retraction modules
- Device shall support one AC power module plus
- Up to eight AV cables, or
- Up to three AV connectivity plates, or
- Up to four cable retraction modules or
- Up to one control module and three AV cables or two single-space mini AV connectivity plates
- If AC power is not required, the device shall then support
- Up to sixteen AV cables, or
- Up to six AV connectivity plates, or
- Up to six cable retraction modules or
- Up to two control modules and three AV cables or two single-space mini AV connectivity plates
- The device shall include retractor and connectivity brackets to support cable retraction modules, AV cables and/or AV connectivity plates.
- The AC or AC-plus-USB power module, and cable pass-through or connectivity module, shall be secured within the enclosure, with no fewer than three installer-determined height positions
- The module shall be secured within the enclosure, mounting to the left or right of an installed AC or AC-plus-USB power module
- AC power modules shall be available for major world markets
- AC US power modules shall be UL listed and CE compliant when installed within the enclosure
- AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
- AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
- AC-plus-USB power modules shall also be available for major world markets
- AC-plus-USB US series power modules shall be UL listed and CE compliant when installed within the enclosure
- AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
- AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
- AC-plus-USB power modules shall provide two USB Type-A power outlets
- AC-plus-USB US outlet USB Type-A power outlets shall provide 5 volts direct current and up to 4.0 amps, or 20 watts total of shared power
- AC-plus-USB non-US outlet USB Type-A power outlets shall provide 5 volts direct current and up to 2.1 amps, or 10.5 watts shared total power by the two USB Type-A outlets
- An external, 12 volts direct current, 1 amp, or 12 watts power supply shall be included with AC-plus-USB non-US series power outlets
- The internal and external power supply shall both be energy efficient and highly reliable
- The internal and external power supply shall both be designed and manufactured by the same entity providing the enclosure and power module
- The cable pass-through plate shall be a single unit
- The plate shall be flexible to allow the installation, removal, or replacement of cables
- The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
- The plate shall include plugs to cap cable pass-through openings that are not utilized
- The plate shall install from the bottom of the installed enclosure
- The assembled, installed plate shall allow servicing from the top of the installed enclosure
- The AV connectivity frame shall be a single unit
- The frame shall be installed to the right or left of an installed AV bracket
- The connectivity bracket shall install from the bottom of the enclosure
- The assembled, installed frame, shall allow servicing from the top of the installed enclosure
- An optional mounting bracket shall allow mounting of 55 mm x 55 mm connector plates
- The bracket shall be installed to the left or right of an installed AV bracket
- The bracket shall install from the bottom of the installed enclosure
- The assembled, installed bracket shall allow servicing from the top of the installed enclosure
- Device shall include an attached and fully integrated, all metal lid and bezel assembly
- The lid and bezel assembly shall have a black anodized finish
- Device lid shall fit entirely within the bezel
- When closed, the lid shall provide a full-width opening for cable pass-through
- When open, the lid shall articulate such that it fits within the enclosure body
- Device shall include a damper that controls the speed of the lid as it moves within the enclosure
- Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
- An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
- The enclosure shall feature an integrated clamp system
- The clamps shall be permanently affixed to the enclosure body
- The clamps shall utilize a lever-and-cam mechanism
- The clamps shall secure the enclosure to the furniture without the need for tools or additional parts
- The clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
- An Internet-accessible application for enclosure configuration and visualization shall be available
- Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, control modules, and cable retraction modules
- Application shall provide accurate depiction of power and connectivity selections
- Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
- Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
- Approved device shall be the Extron Cable Cubby 1202 70-1184-02; no alternates or equals.
- Device shall support one AC power module plus
Cable Cubby 1202 Black, AC Module Not Included
- Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, control modules, and cable retraction modules
- Device shall support one AC power module plus
- Up to eight AV cables, or
- Up to three AV connectivity plates, or
- Up to four cable retraction modules or
- Up to one control module and three AV cables or two single-space mini AV connectivity plates
- If AC power is not required, the device shall then support
- Up to sixteen AV cables, or
- Up to six AV connectivity plates, or
- Up to six cable retraction modules or
- Up to two control modules and three AV cables or two single-space mini AV connectivity plates
- The device shall include retractor and connectivity brackets to support cable retraction modules, AV cables and/or AV connectivity plates.
- The AC or AC-plus-USB power module, and cable pass-through or connectivity module, shall be secured within the enclosure, with no fewer than three installer-determined height positions
- The module shall be secured within the enclosure, mounting to the left or right of an installed AC or AC-plus-USB power module
- AC power modules shall be available for major world markets
- AC US power modules shall be UL listed and CE compliant when installed within the enclosure
- AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
- AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
- AC-plus-USB power modules shall also be available for major world markets
- AC-plus-USB US series power modules shall be UL listed and CE compliant when installed within the enclosure
- AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
- AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
- AC-plus-USB power modules shall provide two USB Type-A power outlets
- AC-plus-USB US outlet USB Type-A power outlets shall provide 5 volts direct current and up to 4.0 amps, or 20 watts total of shared power
- AC-plus-USB non-US outlet USB Type-A power outlets shall provide 5 volts direct current and up to 2.1 amps, or 10.5 watts shared total power by the two USB Type-A outlets
- An external, 12 volts direct current, 1 amp, or 12 watts power supply shall be included with AC-plus-USB non-US series power outlets
- The internal and external power supply shall both be energy efficient and highly reliable
- The internal and external power supply shall both be designed and manufactured by the same entity providing the enclosure and power module
- The cable pass-through plate shall be a single unit
- The plate shall be flexible to allow the installation, removal, or replacement of cables
- The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
- The plate shall include plugs to cap cable pass-through openings that are not utilized
- The plate shall install from the bottom of the installed enclosure
- The assembled, installed plate shall allow servicing from the top of the installed enclosure
- The AV connectivity frame shall be a single unit
- The frame shall be installed to the right or left of an installed AV bracket
- The connectivity bracket shall install from the bottom of the enclosure
- The assembled, installed frame, shall allow servicing from the top of the installed enclosure
- An optional mounting bracket shall allow mounting of 55 mm x 55 mm connector plates
- The bracket shall be installed to the left or right of an installed AV bracket
- The bracket shall install from the bottom of the installed enclosure
- The assembled, installed bracket shall allow servicing from the top of the installed enclosure
- Device shall include an attached and fully integrated, all metal lid and bezel assembly
- The lid and bezel assembly shall have a black anodized finish
- Device lid shall fit entirely within the bezel
- When closed, the lid shall provide a full-width opening for cable pass-through
- When open, the lid shall articulate such that it fits within the enclosure body
- Device shall include a damper that controls the speed of the lid as it moves within the enclosure
- Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
- An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
- The enclosure shall feature an integrated clamp system
- The clamps shall be permanently affixed to the enclosure body
- The clamps shall utilize a lever-and-cam mechanism
- The clamps shall secure the enclosure to the furniture without the need for tools or additional parts
- The clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
- An Internet-accessible application for enclosure configuration and visualization shall be available
- Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, control modules, and cable retraction modules
- Application shall provide accurate depiction of power and connectivity selections
- Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
- Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
- Approved device shall be the Extron Cable Cubby 1202 70-1184-02; no alternates or equals.
- Device shall support one AC power module plus
Cable Cubby 1202 Br Aluminum, AC Module Not Included
- Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, control modules, and cable retraction modules
- Device shall support one AC power module plus
- Up to eight AV cables, or
- Up to three AV connectivity plates, or
- Up to four cable retraction modules or
- Up to one control module and three AV cables or two single-space mini AV connectivity plates
- If AC power is not required, the device shall then support
- Up to sixteen AV cables, or
- Up to six AV connectivity plates, or
- Up to six cable retraction modules or
- Up to two control modules and three AV cables or two single-space mini AV connectivity plates
- The device shall include retractor and connectivity brackets to support cable retraction modules, AV cables and/or AV connectivity plates.
- The AC or AC-plus-USB power module, and cable pass-through or connectivity module, shall be secured within the enclosure, with no fewer than three installer-determined height positions
- The module shall be secured within the enclosure, mounting to the left or right of an installed AC or AC-plus-USB power module
- AC power modules shall be available for major world markets
- AC US power modules shall be UL listed and CE compliant when installed within the enclosure
- AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
- AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
- AC-plus-USB power modules shall also be available for major world markets
- AC-plus-USB US series power modules shall be UL listed and CE compliant when installed within the enclosure
- AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
- AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
- AC-plus-USB power modules shall provide two USB Type-A power outlets
- AC-plus-USB US outlet USB Type-A power outlets shall provide 5 volts direct current and up to 4.0 amps, or 20 watts total of shared power
- AC-plus-USB non-US outlet USB Type-A power outlets shall provide 5 volts direct current and up to 2.1 amps, or 10.5 watts shared total power by the two USB Type-A outlets
- An external, 12 volts direct current, 1 amp, or 12 watts power supply shall be included with AC-plus-USB non-US series power outlets
- The internal and external power supply shall both be energy efficient and highly reliable
- The internal and external power supply shall both be designed and manufactured by the same entity providing the enclosure and power module
- The cable pass-through plate shall be a single unit
- The plate shall be flexible to allow the installation, removal, or replacement of cables
- The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
- The plate shall include plugs to cap cable pass-through openings that are not utilized
- The plate shall install from the bottom of the installed enclosure
- The assembled, installed plate shall allow servicing from the top of the installed enclosure
- The AV connectivity frame shall be a single unit
- The frame shall be installed to the right or left of an installed AV bracket
- The connectivity bracket shall install from the bottom of the enclosure
- The assembled, installed frame, shall allow servicing from the top of the installed enclosure
- An optional mounting bracket shall allow mounting of 55 mm x 55 mm connector plates
- The bracket shall be installed to the left or right of an installed AV bracket
- The bracket shall install from the bottom of the installed enclosure
- The assembled, installed bracket shall allow servicing from the top of the installed enclosure
- Device shall include an attached and fully integrated, all metal lid and bezel assembly
- The lid and bezel assembly shall have a brushed aluminum finish
- Device lid shall fit entirely within the bezel
- When closed, the lid shall provide a full-width opening for cable pass-through
- When open, the lid shall articulate such that it fits within the enclosure body
- Device shall include a damper that controls the speed of the lid as it moves within the enclosure
- Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
- An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
- The enclosure shall feature an integrated clamp system
- The clamps shall be permanently affixed to the enclosure body
- The clamps shall utilize a lever-and-cam mechanism
- The clamps shall secure the enclosure to the furniture without the need for tools or additional parts
- The clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
- An Internet-accessible application for enclosure configuration and visualization shall be available
- Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, control modules, and cable retraction modules
- Application shall provide accurate depiction of power and connectivity selections
- Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
- Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
- Approved device shall be the Extron Cable Cubby 1202 70-1184-08; no alternates or equals.
- Device shall support one AC power module plus
Cable Cubby 1202 Br Aluminum, AC Module Not Included
- Provide a modular, configurable, and furniture-mountable enclosure that shall support a combination of AC power modules, AV cables, control modules, and cable retraction modules
- Device shall support one AC power module plus
- Up to eight AV cables, or
- Up to three AV connectivity plates, or
- Up to four cable retraction modules or
- Up to one control module and three AV cables or two single-space mini AV connectivity plates
- If AC power is not required, the device shall then support
- Up to sixteen AV cables, or
- Up to six AV connectivity plates, or
- Up to six cable retraction modules or
- Up to two control modules and three AV cables or two single-space mini AV connectivity plates
- The device shall include retractor and connectivity brackets to support cable retraction modules, AV cables and/or AV connectivity plates.
- The AC or AC-plus-USB power module, and cable pass-through or connectivity module, shall be secured within the enclosure, with no fewer than three installer-determined height positions
- The module shall be secured within the enclosure, mounting to the left or right of an installed AC or AC-plus-USB power module
- AC power modules shall be available for major world markets
- AC US power modules shall be UL listed and CE compliant when installed within the enclosure
- AC power modules shall include one or two AC power outlets, depending on the size of the AC outlet
- AC power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
- AC-plus-USB power modules shall also be available for major world markets
- AC-plus-USB US series power modules shall be UL listed and CE compliant when installed within the enclosure
- AC-plus-USB power modules shall include one or two AC power outlets, depending on the size of the AC outlet
- AC-plus-USB power modules shall include an attached AC power cord or IEC power inlet with detachable AC power cord, as required by local electrical power codes and conventions
- AC-plus-USB power modules shall provide two USB Type-A power outlets
- AC-plus-USB US outlet USB Type-A power outlets shall provide 5 volts direct current and up to 4.0 amps, or 20 watts total of shared power
- AC-plus-USB non-US outlet USB Type-A power outlets shall provide 5 volts direct current and up to 2.1 amps, or 10.5 watts shared total power by the two USB Type-A outlets
- An external, 12 volts direct current, 1 amp, or 12 watts power supply shall be included with AC-plus-USB non-US series power outlets
- The internal and external power supply shall both be energy efficient and highly reliable
- The internal and external power supply shall both be designed and manufactured by the same entity providing the enclosure and power module
- The cable pass-through plate shall be a single unit
- The plate shall be flexible to allow the installation, removal, or replacement of cables
- The plate shall utilize a split-ring design that accommodates a range of AV cable diameters without the need for supplemental grommets
- The plate shall include plugs to cap cable pass-through openings that are not utilized
- The plate shall install from the bottom of the installed enclosure
- The assembled, installed plate shall allow servicing from the top of the installed enclosure
- The AV connectivity frame shall be a single unit
- The frame shall be installed to the right or left of an installed AV bracket
- The connectivity bracket shall install from the bottom of the enclosure
- The assembled, installed frame, shall allow servicing from the top of the installed enclosure
- An optional mounting bracket shall allow mounting of 55 mm x 55 mm connector plates
- The bracket shall be installed to the left or right of an installed AV bracket
- The bracket shall install from the bottom of the installed enclosure
- The assembled, installed bracket shall allow servicing from the top of the installed enclosure
- Device shall include an attached and fully integrated, all metal lid and bezel assembly
- The lid and bezel assembly shall have a brushed aluminum finish
- Device lid shall fit entirely within the bezel
- When closed, the lid shall provide a full-width opening for cable pass-through
- When open, the lid shall articulate such that it fits within the enclosure body
- Device shall include a damper that controls the speed of the lid as it moves within the enclosure
- Device enclosure shall mount entirely within an opening sufficient to accommodate the enclosure
- An installation routing template, of an appropriate size to accommodate the enclosure, shall be available optionally
- The enclosure shall feature an integrated clamp system
- The clamps shall be permanently affixed to the enclosure body
- The clamps shall utilize a lever-and-cam mechanism
- The clamps shall secure the enclosure to the furniture without the need for tools or additional parts
- The clamps shall allow for removal of the enclosure from the furniture without the need for specialized tools
- An Internet-accessible application for enclosure configuration and visualization shall be available
- Application shall provide for selection of the enclosure, AC power modules, AV cables, AV connectivity plates, control modules, and cable retraction modules
- Application shall provide accurate depiction of power and connectivity selections
- Application shall provide a method of saving a representation of the configured enclosure and corresponding bill of materials
- Application shall provide market-specific pricing of the configured enclosure for budgetary purposes
- Approved device shall be the Extron Cable Cubby 1202 70-1184-08; no alternates or equals.
- Device shall support one AC power module plus
把商品添加到购物车
Order Message Number
产品编号
注: 使用通用交流电源插座的 Extron 产品可支持多种不同的交流电源插头类型。在使用之前，确保设备满足您所在区域的所有规定要求，并符合所有应用的本地安全和电气规程及标准。
当前总计：
Annotation Graphics Processor
To view this page ensure that Adobe Flash Player version
11.0.0 or greater is installed and enabled.
Chrome
Firefox
Edge
Safari