DSC HD-3G A Pro

DSC HD-3G A

1. Provide a video scaler that shall support one input and up to two outputs with a genlock loop-through for processing and converting HDMI to 3G-SDI, HD-SDI, and SDI.
   1. Rack-mountable scaler for HDMI video sources and associated digital and analog audio
      1. Video Input Requirements
         1. Provide video input connection
            1. One HDMI
         2. Support pixel level synchronization of video sources to an external genlock signal
         3. Provide automatic detection of input video parameters
            1. Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes and video clock phase
            2. The user may selectively enable or disable automatic detection for each input
         4. Provide image adjustments for brightness, contrast, detail, H/V positioning, overscan, and sizing
         5. Provide storage and recall of video parameters and picture settings
            1. Automatic memories for each video input
               1. Save video settings and picture adjustments without user intervention
               2. Automatically recall settings when the same video rate is encountered
               3. The user may selectively enable or disable automatic memories
            2. Manual user presets
               1. Save picture adjustments
               2. User presets may be saved and recalled using the front panel controls
               3. User presets may be saved and recalled electronically via RS-232 or USB connection
            3. Manual input presets
               1. Save video settings and picture adjustments
               2. Input presets may be saved and recalled electronically via RS-232 or USB connection
         6. Provide automatic 3:2 and 2:2 pulldown detection
         7. Provide equalization for incoming HDMI signals
      2. Video Output Requirements
         1. Provide simultaneous video output connections
            1. Two BNC for 3G-SDI/HD-SDI/SDI
         2. Provide a range of selectable video output rates from 480i and 576i to HDTV 1080p/60 and 2K, and comply with SMPTE 259M, 292M, 424M, and ITU standards
         3. Provide image scaling and video format conversion at 30-bit precision and support 1080i deinterlacing
         4. Provide aspect ratio control
            1. When in FILL mode, the video image shall always fill the output screen without letterbox or pillarbox
            2. When in FOLLOW mode, the video image on the output screen shall always preserve the aspect ratio of the input signals without distortion
         5. Support locking of the output frame rate to the frame rate of the input
         6. Provide internal test patterns for calibration and setup
         7. Support image freeze via RS-232 or USB connection
         8. Support automatic muting of video and sync output when no video input signal is present
            1. Provide a choice to generate a blue screen or a black screen before disabling sync
            2. Provide a configurable timeout period before disabling sync
            3. The user may selectively enable or disable automatic muting of sync output
         9. Provide a low power standby state selectable via RS-232 or USB
         10. Support selection of output color space as RGB or component video
      3. EDID Requirements
         1. Support assignment of a user-selected EDID resolution and refresh rate to the incoming video signal
      4. Audio Requirements
         1. Provide audio input connections
            1. One HDMI, embedded
            2. One 5-pole captive screw, balanced/unbalanced line level analog stereo
         2. Provide audio output connections
            1. Two BNC, SDI embedded AES3 audio
         3. Support embedding of any analog audio input signal or HDMI multi-channel PCM onto the SDI outputs
         4. Provide a delay in the audio output to match the corresponding video processing delay
         5. Support individual muting of the analog stereo or HDMI audio input
         6. Provide gain and attenuation adjustments for analog input audio
      5. Control Requirements
         1. Provide control connections
            1. 3-pole captive screw: RS-232
            2. Mini USB-B: USB 2.0
         2. Provide alternatives for configuration and operation
            1. On-screen menus navigated using front panel controls
            2. Product configuration software connected via USB
            3. Serial commands sent over RS-232 or USB connection
         3. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
      6. General Requirements
         1. Provide real-time verification of input and output signal format, presence, and power
            1. Directly readable on front panel LEDs
         2. Enclosure shall be rack-mountable, half rack width, and 1RU in height
         3. Shall be equipped with an internal 100-240 VAC, 50/60 Hz universal power supply
         4. Shall meet regulatory compliances
            1. Shall meet safety compliances under CE, c-UL, and UL
            2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
            3. Shall comply with appropriate requirements of RoHS and WEEE
         5. Shall provide three year parts and labor warranty
   2. Approved device shall be the Extron DSC HD-3G A (part number 60-1304-01); no alternates or equals